Technical indicators of spectrum analysis |
Frequency range | 30MHz ~ 6GHz |
Frequency stability | 10-7 |
Frequency accuracy | 10-7 |
Spectrum purity | Single side band phase noise | -100dBc@1kHz,1GHz -103dBc@10kHz,1GHz -104dBc@100kHz,1GHz -125dBc@1MHz,1GHz |
Signal processing | Instantaneous bandwidth | 100MHz |
RBW | 10Hz ~ 5MHz |
Maximum damaged input signal power (continuous wave) | 26 dBm shutdown prevention (reference level > 0 dBm) 10 dBm startup prevention (reference level < 0 dBm) |
Detection method | Normal, sampling, peak value, RMS |
Technical indicators of network analysis |
Frequency range | 30MHz ~ 6GHz |
Measurement | Measurement parameters | S11 (external bridge) S21 |
Display format of measured data | LogMag(dB), Phase(Deg), Group Delay, SWR, Smith, Impedance |
Resolution bandwidth range | 100Hz ~ 1MHz |
Resolution bandwidth step | 100Hz |
Transmitter output level | -9dBm ~ -30dBm |
Transmitter output level step | 1dB |
Transmitter maximum RF input power | 26dBm |
Dynamic measurement range | 30MHz ~ 600MHz | Use the embedded calibration (Averaging function enabled, average factor 10) | >120dB | Do not use the embedded calibration (Averaging function enabled, average factor 10) | >90dB |
600MHz ~ 4.5GHz | >105dB | >75dB |
4.5GHz ~ 6GHz | >100dB | >70dB |
Amplitude accuracy | 30MHz ~ 4.5GHz | Averaging function enabled, average factor 10 | ±0.4° | Averaging function disabled | ±1° |
4.5GHz ~ 6GHz | ±0.8° | ±3° |
Group delay aperture | 1 ~ 6001 |
Technical indicators of dual-channel vector signal generation |
Frequency range | 30MHz ~ 6GHz |
Frequency stability | 10-7 |
Frequency accuracy | 10-7 |
Spectrum purity | Harmonic suppression | -35dBc@1GHz (typical) |
Clutter suppression | -53dBc@1GHz (typical) |
Amplitude | Dynamic output signal power range | -120dBm~10dBm |
Output signal power step | 0.1dB |
Channel and coherence characteristics | Number of channels | Dual-channel coherence |
Dual-channel phase coherence characteristics | 2° |
Dual-channel amplitude coherence characteristics | 0.3dB |
Dual-channel coherence adjustment | Phase adjustment; amplitude adjustment; group delay adjustment |
Signal processing | Maximum signal bandwidth | 120MHz |
Resolution | 16 bit |
Arbitrary waveform storage depth | 1GSample@ single-channel 500MSample@ dual-channel |
External reference frequency range | 5MHz~100MHz |
Technical indicators of oscilloscope |
Number of channels | Independent four-channel |
Sample rate | 1GSample/s |
Signal bandwidth | 250MHz |
Storage depth | 64k |
Waveform calculation | +- X / FFT reverse direction |
Automatic measurement | Maximum value, minimum value, peak-to-peak value, period, frequency, rise time, fall time, positive duty cycle, negative duty cycle, positive pulse width, negative pulse width, etc. |